5 Tips To Help You Keep Your Conveyor Chains Operational

Conveyor chains are used to drive different types of conveyor units and use different types of power transmission. If you want to get the most out of your equipment, make sure you maintain them. This is even more important if they are installed in the mining and construction industry. Given below are a few tips that can help you ensure your conveyor chains will continue to work properly.

1. Follow the Maintenance Schedule

First of all, you may want to inspect and service them to ensure proper alignment, lubrication and tension. If inspected on a regular basis, they can last up to 15,000 hours. It’s better if you schedule filter and oil changes every 3 months. On the other hand, the cleaning of bigger parts, such as shafts, machine lubrication and replacement of damaged or worn sprockets and sideplats should be done on an annual basis.

Following the maintenance schedule is paramount, especially if you have installed the conveyor chains in the construction and mining industry.

2. Lubricate Wisely

For smooth operation, conveyor drives and chains should be free of moisture and dust. Most of these systems require petroleum-based oil. It’s not a good idea to opt for heavy greases and heavy oils. The reason is that they are overly stiff and can’t lubricate the system properly. Given below are some common ways of lubricating the conveyor chains. Some of them are listed below:

Stream lubrication
Disk lubrication
Drip lubrication
Manual lubrication

Based on the power and chain speed, the right method can be used. For reducing wear and tear and enjoying all the benefits, it’s important that you lubricate the system properly.

3. Get Heat-Treated Parts

Heat treatment can be used to improve the mechanical components. Therefore, manufacturers control the treatment methods for best results. In other words, to reduce wear and tear, it’s important to perform proper heat treatment.

Case hardness and depth are the two primary parts of component heat transfer. This plays a great role as far as resistance and durability is concerned. If the depth is too much, the parts may break while working due to brittleness.

4. Make sure there is Proper Alignment and Tension

Make sure you check the slack span and chain tension, and perform the required maintenance. If you need to reduce the tension, you can eliminate two pitches and then connect the chain again. However, you may need to replace the entire chain if the wear and tear goes beyond the functional limits.

Also, you may not want to connect new chains to the worn one as it can damage the drive. Misaligned sprockets can also cause the link plates of the roller chain to get a lot of wear and tear.

5. Check the Primary Parts

Typically, conveyor chains have two main parts that go through wear and tear: sprockets and chain. Chain stretching happens due to this very reason and results in the complete replacement of the sprockets and chain.

Therefore, you should inspect conveyor chains for any broken parts, deformation and cracks.

In short, these are the tips you can follow to maintain your roller chains.

10 Home Improvement Projects You Can Finish This Weekend – On a Budget

1.) Programmable Thermostat:

OK, so we know that this particular home improvement project doesn’t add anything aesthetically to your home design, but let’s be honest- trimming around 5-10% a year off your heating/cooling bill, plus allowing you more control over the interior temperature, all while getting a new high-tech gadget is a win-win-win-win situation. A programmable thermostat allows you to avoid ever having to come home to a sweltering heat after a long day of work. It allows you piece of mind when leaving pets at home, no matter how hot it is outside. Coming in at around $75-$120 to have one installed for you- it’s truly an incredibly cost-effective way to make sure you get the most comfort possible out of your home. HouseLogic.Com has some pretty good information on choosing what type of thermostat will suit your needs. And no need to fear! Programmable thermostats (like most other electronic devices in our day-and-age) have become more and more user-friendly and easy to operate.

2.) Add a Splash of Color with an Accent Wall:

Painting an entire wall can be a nightmare (believe me, we know), and after a long week of work, the prospect of taking on such an overwhelming and exhausting task inevitably leads to a room that stays that same old neutral beige. Well- here’s a compromise. How about an accent wall? The difference a single wall of bold color can make in a room cannot be ignored. An accent wall is a great place to start remodeling or refurnishing your home. It gives you a base color palate with which to work, and can aid in the later selection of pillows, rugs, chairs etc. With an overall project time hovering around 6-8 hours (depending on the size of the wall you’re painting) from start to finish; painting an accent wall is a sure-fire way to add a touch of pizzazz to your room.

3.) Paint a Custom Headboard or Faux Headboard:

The sky is really the limit on this one. And the best part is that your ventures through a local thrift shop or Goodwill can yield amazing results at unbelievably low prices (if any). Being in touch with, and actively monitoring Craigslist is a secret weapon when it comes to designing on a realistic budget. You can go with vibrant, muted, pastels, or even fabrics and various textures!

Recently a trend has been becoming more and more popular in US homes: a faux headboard. What does this mean? It means that you literally use the wall and space already available to create a creative and very innovative design in place of a bulky headboard in your room. Pinterest has some beautiful galleries if you’re looking for some inspiration. The complexity and project time it will take to finish a headboard creation of your very own is entirely up to you. Some companies even offer templates and decals that can be stuck directly to a wall. The advantage to a faux headboard is beyond aesthetic. Aside from the space you can save, and the flexibility in design you will have, a faux headboard is easy to change, easy to update, and can be modified to reflect changing trends or a changing room.

4.) DIY Message Center:

If you’re anything like me, your life is a constant cacophony of mental “to-do” lists, family engagements to keep, errands that need to be run, bills that need to be paid, and a way of communicating that often gets lost in the mix. Creating a DIY message center is a perfect way to make sure everyone is on the same page. What’s wonderful about these types of message centers is that most, if not all, of the materials you may need can either be found at a local thrift store or on the free section of CL. Don’t marry yourself to chalkboard either. Although chalkboard is an easy solution (especially now that it comes in huge sheets with an adhesive back ( like contact paper), you should also consider using a pane of glass (painted on one side) and framed! It’s the perfect mimic of a dry-erase board, but with markedly more style. You can even use a very thin piece of aluminum if you want to exclusively use magnets, and for those talented seamstresses out there- cloth and ribbon will also create a beautiful, versatile, and most importantly- functional piece to your home… and on a budget. Many of these message centers come with a section for mail, a section to write notes, and a board to post important bulletins to yourself or your family. I’ve seen every design style from rustic to modern, so whatever the style of your home, you can build a message center to compliment your design scheme while adding functionality.

5.) Change Your Faucets:

An often over-looked item on the “home improvement” list- changing your faucets is a simple way to really alter the look and feel of a room. Outside of accent pillows, it is the easiest way to breathe life back into a kitchen or bathroom. Your local hardware store has some great selections – don’t be afraid to be a little daring! Just make sure that all of the hardware matches, and decide whether or not it is important to you to have the same hardware throughout the house. This is also a perfect opportunity to re- pet-proof and child-proof your low lying cabinets.

6.) Add Some Under/Over Cabinet Accent Lighting:

If you want to really add some wow to your living space, consider over/under cabinet lighting. I cannot stress enough: spend the additional money and get lids. At $20 a roll, you can get LED rope lighting in any color you can imagine. Dramatic lighting like this can add incredible depth and dimension to your design space while creating a great atmosphere and additional lighting without the bulk or hassle of adding a new lighting fixture. Some companies do offer these types of lights at a premium- requiring electrical work and a contractor, but the same effect can be achieved with a simple trip to a local store and a little bit of clever fastening. Secure the rope lights out of sight at the junction where your counter meets the body of the cabinet, or hidden on the very top. The lights will reflect light off the wall or cabinet (depending on placement) and will create a dramatic, and beautiful effect that really gives a cutting edge style to any room.

7.) Add a Back-Splash:

Now, depending on how you go about this- it can be both costly and time consuming to install a back splash on your wall. Unless you have some experience with DIY home improvement, I would suggest leaving tile and grout projects to a professional, however, there are ways to install a back splash that can be done by anyone, regardless of experience level. Many home improvement stores sell sheets of pre-made, self-adhesive back splashes that mimic the look of real ceramic tile. Of course- consult with a professional (even if only your native home improvement associate) about which type and material of tile or tile replica you should get. A backsplash is another element like the accented wall; it’s a dash of color and a break up homogeny that adds texture and life to a drab space.

8.) Throw Pillows:

This is more a decorating tip than a home improvement tip- but its details like these that can really tie a room together and help a design space make that leap from concept to polished idea. Think bold and bright. Throw pillows can be just enough color to make a room interesting without being overwhelming or overbearing. Experiment with different texture and fabric combinations, find a mix that suits you. Inexpensive, with big impact; throw pillows are the un-sung heroes of home interior design.

9.) Paint Your Front Door:

Look at almost any “tips, tricks, and ideas” for home improvement, and somewhere on that list will be replacing/repainting the front door. I couldn’t agree more. Beyond the obvious curb appeal, painting your front door can really refresh your home and add some vibrancy and style to your home-front. First impressions are the most important, right? Make the first impression of your home to be one of happiness and warmth. For less than $30, you won’t believe the difference it will make!

10.) Pick a Room: Replace All the Cloth You See:

Updating window treatments, runners, rugs, pillows, and can transform any room in a matter of an instant. That’s the wonderful thing about color; it can change not only the look, but the feel of any space. Even something as simple as replacing curtains can shed years off the appearance of your home- and let’s face it- replacing window treatments is another task on that perpetual, and unending list of “I’ll get to that one day” projects we all keep tucked away. Changing accents like these is flexible, non-committal, and allows space for experimentation and growth over time. Not many home improvement projects can provide that kind of fluidity.

In closing – as much as we would like to think that the only way to make a real impact on the aesthetics of a home is through big design projects, there are clearly small ways in which anyone can transform their home on a realistic budget, in a short amount of time. The above listed improvements can be a family project, involve family, friends, and enjoy creating a beautiful home space and spending some quality time with those close to you. You don’t have to break the bank to change your home’s style. It’s a journey that can be accomplished one step at a time.

Estimating Home Improvement Projects

More and more homeowners are turning to home improvement to transform their New York homes to ideally fit the needs of the family, realize their dreams of luxury and style, make everyday life a whole lot more convenient, boost property value, or just any other reasons. One of the most crucial factors when jumping into the bandwagon is the right budget. The more accurate the estimate, the closer you are to achieving project success. To get to this, here are essential things to know about estimating home improvement projects ideal whether you are in Manhattan, Queens, Staten Island, Brooklyn or Staten Island.

Estimating your planned home improvement project is a crucial task that should be taken carefully. Falling short on budget can cause grave issues such as an incomplete project, an inferior result, or financial instability that can lead to debts that can easily snowball into other problems.

If you haven’t done anything similar to the home improvement you have in mind, then getting an estimate would be the best way to start your project. This would get you a good idea on how much the entire project would cost thus helping you get financially prepared and preventing a busted budget. Just as no two houses are exactly the same; your specifications would vary with that of others even for the same project. There are a lot of factors that affect the overall cost and asking around for other homeowners who have had done something similar would be the roughest assessment you can get.

When estimating home improvement projects, the easiest and fastest way to get one is through using an online remodeling calculator from any renovation and home improvement or contractor website. But the closest and most accurate estimate you can get is one from a reputable professional or contractor company.

There are various factors that will affect your home improvement project estimate and these are:

Scope of the Project – this includes the size of the room or rooms that you plan on improving. What materials and supplies you want to integrate into the project. How you envision the project finish and what are the methods and steps to take to achieve the specific look, feel and functionality.

Labor Trends and Regional Pricing – fact is, remodeling costs will differ depending on the state that you are in. This proves true for both contractor fee as well as material costs.

Labor Fees – There are choices when it comes to managing home improvement projects and this includes: managing it yourself, getting a general contractor or hiring a project manager part-time or full time. Each option has its pros and cons and deciding on which depends on your experience, preference, budget and availability. Aside from the labor trends in different states, other factors that will affect contractor fee are specialization/s, experience, skills and even how well established and well-reputed the contractor or company is in the industry.

One of the greatest tips when undergoing home improvement projects is to allot a budget that is more than that of the estimated amount. By allowing flexibility in your finances, unexpected expenses that may arise throughout the project (which are not uncommon), can be accommodated efficiently before the problem balloons. If you have to save, then choose to do so in a smart way. Cut costs without sacrificing quality and you can do this by buying materials on sale and scheduling work at off-peak seasons.